Purchase Models

Picture      
Model name MODEL 225 MODEL 327 EFI MODEL 329B
Engine Kohler Command Pro, V-Twin Kohler Command Pro, Delphi®-based closed-loop Electronic Fuel Injection(EFI)/V-Twin B&S Vanguard Big Block, 2-cylinder
Displacement 45.6 cu. in. (747 cc) 45.6 cu. in. (747 cc) 54.6 cu. in. (896 cc)
Lubrication system Pressure Lube/Filter Pressure Lube/Filter Pressure Lube/Filter
Crankshaft Horizontal Horizontal Horizontal
Cooling System Air Air Air
Fuel Capacity 12 U.S. Gal. (45.4 l) 12 U.S. Gal. (45.4 l) 12 U.S. Gal. (45.4 l)
Cutting height range 1.0 to 5.0 in. (2.5cm to 12.7 cm) 1.0 to 5.0 in. (2.5cm to 12.7 cm) 1.0 to 5.0 in. (2.5cm to 12.7 cm)
Construction Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick – more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil- Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick- more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil- Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick- more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-e
Spindle assemblies Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion. Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion. Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Spindle housings 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern. 8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 52- and 61-inch deck. Cast iron on 72-inch deck. 8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 52- and 61-inch deck. Cast iron on 72-inch deck.
Blade drive Belt drive with single Kevlar V-belt and idler arm tensioning. Belt drive with single Kevlar V-belt and idler arm tensioning. Belt drive with single Kevlar V-belt and idler arm tensioning.
Weight 1050 lbs. (476.3 kg) 1140 lbs. (517.1 kg) 1140 lbs. (517.1 kg)
Warranty 4 years 4 years 4 years
Purchase Buy Now Discounted Discounted
Picture      
Model name MODEL 225V MODEL 226V MODEL 227V EFI
Engine Kohler Confidant, V-Twin B&S Commercial Turf, V-Twin Kohler Confidant, Delphi®-based, closed-loop, Electronic Fuel Injection (EFI), V-Twin
Displacement 45.6 cu. in. (747 cc) 49.4 cu. in. (810 cc) 45.6 cu. in. (747 cc)
Lubrication system Pressure Lube/Filter Pressure Lube/Filter Pressure Lube/Filter
Crankshaft Vertical Vertical Vertical
Cooling System Air Air Air
Fuel Capacity 12 U.S. Gal. (45.4 l) 12 U.S. Gal. (45.4 l) 12 U.S. Gal. (45.4 l)
Cutting height range 1.0 to 5.0 in. (2.5 to 12.7 cm) 1.0 to 5.0 in. (2.5cm to 12.7 cm) 1.0 to 5.0 in. (2.5cm to 12.7 cm)
Construction Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick – more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvi Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thic – more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil Double-layered 10-gauge plus 7-gauge formed-steel laminate spindle plane 0.313 in (7.95 mm) thick – more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil
Spindle assemblies Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion. Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion. Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Spindle housings 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern. 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern. 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade drive Belt drive with single Kevlar V-belt and idler arm tensioning. Belt drive with single Kevlar V-belt and idler arm tensioning. Belt drive with single Kevlar V-belt and idler arm tensioning.
Weight 1010 lbs. (449.1 kg) 990 lbs. (449.1 kg) 1015 lbs. (460.4 kg)
Warranty 4 years 4 years 4 years
Purchase Buy Now Buy Now Discounted
Picture      
Model name MODEL 335 MODEL 432 MODEL 623T
Engine B&S Vanguard Big Block, 2-cylinder Kubota, 3-cyl. Kohler Command Pro, V-Twin
Displacement 60.6 cu. in. (993 cc) 58.7 cu. in. (962 cc) 42.4 cu. in. (694 cc)
Lubrication system Pressure Lube/Filter Pressure Lube/Filter Pressure Lube/Filter
Crankshaft Horizontal Horizontal Horizontal
Cooling System Air Liquid Air
Fuel Capacity 12 U.S. Gal. (45.4 l) 12 U.S. Gal. (45.4 l) 4.0 U.S. Gal. (15.14 l)
Cutting height range 1.0 to 5.0 in. (2.5cm to 12.7 cm) 1.0 to 5.0 in. (2.5cm to 12.7 cm) 1.25 to 5.0 in. (3.2 cm to 12.7 cm)
Construction Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick- more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-e Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick- more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-e Tubular 2.25 in. x 4 in. boxed members with 0.25 in. gussets. Formed double thickness hardened steel (0.239 in. = 3 gauge (6.07mm)) truss spindle plane and (3) Sentry™ spindles and a triple-strength upper deck, over 1/2 inch thick in stress zones. G
Spindle assemblies Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion. Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion. Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap.
Spindle housings 8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 61-inch deck. Cast iron on 72-inch deck. 8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 61-inch deck. Cast iron on 72-inch deck. 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade drive Belt drive with single Kevlar V-belt and idler arm tensioning. Belt drive with single Kevlar V-belt and idler arm tensioning. Maintenance-free gearbox with single Kevlar V-belt and idler arm tensioning.
Weight 1190 lbs. (539.8 kg) 1410 lbs. (639.6 kg) 750 lbs. (340.2 kg)
Warranty 4 years 4 years 4 years
Purchase Discounted Buy Now Buy Now
Picture      
Model name MODEL 124V MODEL 125V MODEL 126V
Engine B&S Commercial Turf, V-Twin Kohler Confidant, V-Twin B&S Commercial Turf, V-Twin
Displacement 44.2 cu. in. (724 cc) 45.6 cu. in. (747 cc) 49.4 cu. in. (810 cc)
Lubrication system Pressure Lube/Filter Pressure Lube/Filter Pressure Lube/Filter
Crankshaft Vertical Vertical Vertical
Cooling System Air Air Air
Fuel Capacity 3 U.S. Gal. (11.4 l) 6.5 U.S. Gal. (24.6 l) 6.5 U.S. Gal. (24.6 l)
Cutting height range 1.0 to 5.0 in. (2.5 to 12.7 cm) 1.0 to 5.0 in. (2.5 to 12.7 cm) 1.0 to 5.0 in. (2.5 to 12.7 cm)
Construction Double-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts. Double-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts. Double-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts.
Spindle assemblies Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion. Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Spindle housings 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern. 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern. 8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade drive Belt drive with single Kevlar V-belt and idler arm tensioning. Belt drive with single Kevlar V-belt and idler arm tensioning. Belt drive with single Kevlar V-belt and idler arm tensioning.
Weight 700 lbs. (317.5 kg) 810 lbs. (367.5 kg) 830 lbs.(376.5 kg)
Warranty 4 years 4 years 4 years
Purchase Discounted Buy Now Buy Now